Vacuum line Delete!!

In these diagrams we will show you how to delete ur mess of vacuum lines on a 2G !!! Not a very hard Process but u gotta follow instructions!! The function of this mod is to clean up the engine bay by reducing the amount of visible vacuum lines. Although the power gains from this mod are minute your car will run cleaner due to the lack of the EGR.







The Waste Gate, Fuel Pressure Solenoid , Exhaust Gas Recirulation Solenoid and EVAP Solenoid ports don't need to be
plugged. However, leave them plugged in to prevent the ECU
from throwing Check Engine Light and plug the port of the evaporation
canister hose on the turbo inlet hose after you remove the
canister. The boost gauge may be ran off the "P"port of the
throttle body or the FPS line.